Jacopo Corno

Dr.-Ing. Jacopo Corno

Arbeitsgebiet(e)

Publications

Exportieren als [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Gruppiere nach: Publikationsjahr | Typ des Eintrags | Keine Gruppierung
Springe zu: 2019 | 2018 | 2017 | 2016 | 2015 | 2014
Anzahl der Einträge: 28.

2019

Georg, Niklas ; Ackermann, Wolfgang ; Corno, Jacopo ; Schöps, Sebastian (2019):
Uncertainty Quantification for Maxwell's Eigenproblem based on Isogeometric Analysis and Mode Tracking.
In: Computer Methods in Applied Mechanics and Engineering, Elsevier, S. 228-244, 350, ISSN 0045-7825,
DOI: 10.1016/j.cma.2019.03.002,
[Online-Edition: https://doi.org/10.1016/j.cma.2019.03.002],
[Artikel]

Buffa, Annalisa ; Corno, Jacopo ; de Falco, Carlo ; Schöps, Sebastian ; Vázquez, Rafael (2019):
Isogeometric Mortar Coupling for Electromagnetic Problems.
In: arXiv, [Report]

2018

Georg, Niklas ; Corno, Jacopo ; De Gersem, Herbert ; Zadeh, Shahnam Gorgi ; Römer, Ulrich ; Schöps, Sebastian ; Sulimov, Alexey ; van Rienen, Ursula (2018):
Uncertainty quantification for the fundamental mode spectrum of the European XFEL Cavities.
In: 13th International Computational Accelerator Physics Conference (ICAP18), [Online-Edition: http://bt.pa.msu.edu/ICAP18],
[Konferenzveröffentlichung]

Merkel, Melina ; Bontinck, Zeger ; Corno, Jacopo ; Schöps, Sebastian ; De Gersem, Herbert (2018):
Harmonic Stator-rotor Coupling for The Simulation of Electrical Machines Using Isogeometric Analysis.
Maxwell in Motion, In: Workshop on Advances in Electromagnetic Research — KWT 2018, Rietzlern, Austria, [Online-Edition: http://maxwell-in-motion.org],
[Konferenzveröffentlichung]

Bontinck, Zeger ; Corno, Jacopo ; Schöps, Sebastian ; De Gersem, Herbert (2018):
Iso-Geometric Analysis as a Tool for Simulating Electrical Machines.
In: 20th European Conference on Mathematics for Industry (ECMI 2018), Budapest, Hungary, [Online-Edition: http://ecmi.bolyai.hu],
[Konferenzveröffentlichung]

Bontinck, Zeger ; Corno, Jacopo ; Schöps, Sebastian ; De Gersem, Herbert (2018):
Isogeometric Analysis and Harmonic Stator-Rotor Coupling for Simulating Electric Machines.
In: Computer Methods in Applied Mechanics and Engineering, S. 40-55, 334, ISSN 0045-7825,
DOI: 10.1016/j.cma.2018.01.047,
[Online-Edition: https://doi.org/10.1016/j.cma.2018.01.047],
[Artikel]

Bontinck, Zeger ; Corno, Jacopo ; Bhat, Prithvi ; De Gersem, Herbert ; Schöps, Sebastian (2018):
Modeling of a Permanent Magnet Synchronous Machine Using Isogeometric Analysis.
In: COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, S. 1805-1814, 37, (5), ISSN 0332-1649,
DOI: 10.1108/COMPEL-01-2018-0014,
[Online-Edition: https://doi.org/10.1108/COMPEL-01-2018-0014],
[Artikel]

2017

Bontinck, Zeger ; Corno, Jacopo ; Gersem, Herbert De ; Kurz, Stefan ; Pels, Andreas ; Schöps, Sebastian ; Wolf, Felix ; de Falco, Carlo ; Dölz, Jürgen ; Vázquez, Rafael ; Römer, Ulrich (2017):
Recent Advances of Isogeometric Analysis in Computational Electromagnetics.
In: ICS Newsletter (International Compumag Society), 3, [Online-Edition: http://www.compumag.org/jsite/images/stories/newsletter],
[Artikel]

Corno, Jacopo ; Buffa, Annalisa ; de Falco, Carlo ; Schöps, Sebastian ; Vázquez, Rafael
Reali, Alessandro ; Sangalli, Giancarlo ; Buffa, Annalisa ; Auricchio, Ferdinando (Hrsg.) (2017):
Domain Substructuring using IGA and FEM with Application to Radio Frequency Cavity Simulation.
Pavia, Italy, ECCOMAS, In: International Conference on Isogeometric Analysis IGA 2017, Pavia, Italy, [Konferenzveröffentlichung]

Corno, Jacopo ; Bontinck, Zeger ; De Gersem, Herbert ; Schöps, Sebastian
Schäfer, Michael (Hrsg.) (2017):
Isogeometric Analysis for Electrical Machine Simulation.
Darmstadt, Germany, In: 4th International Conference on Computational Engineering (ICCE 2017), Darmstadt, Germany, [Konferenzveröffentlichung]

Bhat, Prithvi ; De Gersem, Herbert ; Bontinck, Zeger ; Schöps, Sebastian ; Corno, Jacopo (2017):
Modeling of a Permanent Magnet Synchronous Machine Using Isogeometric Analysis.
In: 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF 2017), [Konferenzveröffentlichung]

Bontinck, Zeger ; Corno, Jacopo ; Schöps, Sebastian ; De Gersem, Herbert (2017):
Modeling an electric machine with isogeometric analysis.
In: Workshop on Advances in Electromagnetic Research — KWT 2017, [Online-Edition: http://maxwell-in-motion.org],
[Konferenzveröffentlichung]

Corno, Jacopo ; de Falco, Carlo ; Schöps, Sebastian (2017):
Reduced Order Modelling for Lorentz Detuning of Superconducting Accelerator Cavities.
In: Coupled Problems 2017, [Online-Edition: http://congress.cimne.com/coupled2017],
[Konferenzveröffentlichung]

Ackermann, Wolfgang ; Corno, Jacopo ; de Falco, Carlo ; Georg, Niklas ; Kellermann, Malena ; Krimm, Alexander ; Schöps, Sebastian
Schuhmann, Rolf (Hrsg.) (2017):
Eigenvalue Tracking for the Sensitivity Analysis of Resonant Modes in Superconducting Cavities.
Groß-Behnitz, Germany, In: URSI-B Workshop Felder und Wellen, Groß-Behnitz, Germany, [Konferenzveröffentlichung]

Corno, Jacopo (2017):
Numerical Methods for the Estimation of the Impact of Geometric Uncertainties on the Performance of Electromagnetic Devices.
Darmstadt, Technische Universität, [Online-Edition: http://tuprints.ulb.tu-darmstadt.de/7038],
[Dissertation]

2016

Ackermann, Wolfgang ; Corno, Jacopo ; de Falco, Carlo ; Georg, Niklas ; Kellermann, Malena ; Krimm, Alexander ; Schöps, Sebastian (2016):
Eigenvalue Tracking for the Sensitivity Analysis of Higher Order Modes.
In: ICFA Mini Workshop on High Order Modes in Superconducting Cavities (HOMSC) 2016, [Online-Edition: http://indico.cern.ch/event/465683/],
[Konferenzveröffentlichung]

Corno, Jacopo ; de Falco, Carlo ; Schöps, Sebastian (2016):
Towards Reduced Order Modelling of Resonant Cavities for Particle Accelerators.
In: 3rd Workshop on Order Reduction Methods (WORM 2016), [Konferenzveröffentlichung]

Corno, Jacopo ; de Falco, Carlo ; Schöps, Sebastian (2016):
IsoGeometric State Concatenation Method for Reduced Order Simulation of Complex Accelerator Cavities.
In: 18th European Conference on Mathematics for Industry (ECMI 2016), [Online-Edition: http://www.usc.es/congresos/ecmi2016/],
[Konferenzveröffentlichung]

Corno, Jacopo ; de Falco, Carlo ; De Gersem, Herbert ; Schöps, Sebastian (2016):
Isogeometric Simulation of Lorentz Detuning in Superconducting Accelerator Cavities.
In: Computer Physics Communications, Elsevier, S. 1-7, 201, ISSN 0010-4655,
[Online-Edition: http://doi.org/10.1016/j.cpc.2015.11.015],
[Artikel]

Corno, Jacopo (2016):
An Isogeometric Framework for the Optimization of Accelerator Cavities.
In: 10th International Symposium on Electric and Magnetic Fields (EMF 2016), [Online-Edition: http://www.aimontefiore.org/emf2016/],
[Konferenzveröffentlichung]

2015

Corno, Jacopo ; de Falco, Carlo ; Schöps, Sebastian (2015):
OdePkg: Present and Future.
In: OctConf 2015, [Online-Edition: http://wiki.octave.org/OctConf_2015],
[Konferenzveröffentlichung]

Corno, Jacopo ; Pels, Andreas ; de Falco, Carlo ; Schöps, Sebastian
Fichte, Lars Ole (Hrsg.) (2015):
On the Use of Isogeometric Analysis in Electrical Engineering.
Miltenberg, In: URSI Kleinheubacher Tagung (KHB 2015), Miltenberg, [Online-Edition: https://www.kh2015.de],
[Konferenzveröffentlichung]

Corno, Jacopo ; Schöps, Sebastian
Guo, Lei (Hrsg.) (2015):
Modelling of TESLA cavities' eccentricity with Isogeometric Analysis.
Beijing, China, In: 8th International Congress on Industrial and Applied Mathematics (ICIAM 2015), Beijing, China, [Online-Edition: http://www.iciam2015.cn],
[Konferenzveröffentlichung]

Corno, Jacopo ; de Falco, Carlo ; De Gersem, Herbert ; Schöps, Sebastian (2015):
Isogeometric Analysis Simulation of TESLA Cavities Under Uncertainty.
In: Proceedings of the International Conference on Electromagnetics in Advanced Applications (ICEAA) 2015, S. 1508-1511, [Online-Edition: http://dx.doi.org/10.1109/ICEAA.2015.7297375],
[Buchkapitel]

Pels, Andreas ; Bontinck, Zeger ; Corno, Jacopo ; De Gersem, Herbert ; Schöps, Sebastian (2015):
Optimization of a Stern-Gerlach Magnet by Magnetic Field-Circuit Coupling and Isogeometric Analysis.
In: IEEE Transactions on Magnetics, 51, (12), [Online-Edition: http://dx.doi.org/10.1109/TMAG.2015.2462806],
[Artikel]

2014

Corno, Jacopo ; de Falco, Carlo ; De Gersem, Herbert ; Schöps, Sebastian (2014):
High order isogeometric simulation of Lorentz detuning in SC accelerator cavities.
In: Seminar at the Felix Klein Zentrum für Mathematik, Technische Universität Kaiserslautern, [Konferenzveröffentlichung]

Corno, Jacopo ; de Falco, Carlo ; De Gersem, Herbert ; Schöps, Sebastian (2014):
High Order Isogeometric Simulation of Lorentz Detuning in Superconducting Accelerator Cavities.
In: 6th International Conference on Advanced COmputational Methods in ENgineering (ACOMEN), [Konferenzveröffentlichung]

Corno, Jacopo ; de Falco, Carlo ; De Gersem, Herbert ; Schöps, Sebastian (2014):
Isogeometric Simulation of Lorentz Detuning in Superconducting Accelerator Cavities.
In: 16th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2014), [Konferenzveröffentlichung]

Diese Liste wurde am Fri Nov 22 06:21:48 2019 CET generiert.

zur Liste